How to master with maximus upgrade#

The Hero board includes a dedicated circuit that safely circumvents DDR5 memory PMIC restrictions so users can push past the default 1.1-volt limit to increase overclocking headroom-a feature youвЂ™ll find on many of the mid-range and greater boards.

DDR5 RAM moves the 12V Power Management IC (PMIC) onto the sticks themselves for on-DIMM voltage regulation. So far, itвЂ™s been a вЂset XMP and goвЂ™ experience across the two motherboards weвЂ™ve tested so far.ДЄs the platform matures over time, DDR5 memory speeds will likely increase while timings decrease, but for now, DDR5вЂ™s main benefit is lower voltage and power consumption. WeвЂ™re running GSkill Trident Z5 DDR5 5600 Cе…ѓ6 sticks on our test system to give you a little idea. With the Alder Lake platformвЂ™s maximum rated speed at DDR4 4800, thereвЂ™s a lot of headroom on paper. Just watch the pressure on the old cooling device as the overall vertical вЂZвЂ™ height is a bit taller on the previous-gen platform (5mm for Rocket Lake, compared to Alder's roughly 4.5mm).Д¬ontinuing right, we run into the four DDR5 DRAM slots, capable of supporting up to 128GB of RAM with speeds listed up to DDR5 6400+(OC).

How to master with maximus upgrade#

YouвЂ™ll also notice the board has holes to fit both LGA1200 and LGA1700, which is helpful if you donвЂ™t have an upgrade kit for your existing cooling solution. Moving right, the socket area is busy with several capacitors dotting the area surrounding the socket itself. Just above the VRM heatsinks are two 8-pin EPS connectors to deliver power to the CPU-only one is. ThereвЂ™s a lot of mass and surface area here, so we expect it to keep the VRMs running within spec. Below that are the large and heavy VRM heatsinks connected via an embedded heatpipe. The RGB lights themselves are saturated and bright, and the low-resolution look is unique. (2) M.2 Q-Latch packages for M.2 backplateДЇocusing on the top half of the board, we get a close look at the RGB lighting above the VRM and rear IO.(2) M.2 screw packages for ROG Hyper M.2 Card.An ROG Hyper M.2 add-in-card also comes included to add additional M.2 sockets. You get the basics such as SATA cables and a Wi-Fi antenna, along with a USB drive with drivers. The Maximus Z690 Hero includes quite a bit of extras in the box. (8) 4-Pin (CPU, CPU OPT, AIO, Chassis, W_PUMP)Дў-character debug LED, Post Status Checker (4 LEDs) (2) Thunderbolt 4, Type-C (40 Gbps, up to 5V/12A 60W charging support)